GAUGING AND SORTING MACHINE FOR CARTRIDGE CASE
PRINT DOCUMENT
Purpose:
Machine is used to check the following parameters of the Cartridge cases.
  • Total length H & L
  • Rim diameter H & L
  • Groove diameter H & L
  • Fire Hole presence
  • Rim thickness H & L
  • Primer chamber diameter H & L
  • Length to shoulder H & L
  • Mouth internal diameter H & L
  • Full form H & L
  • Primer chamber depth H & L
    		•
     
    CALIBER: 5.56mm, 9mm, 7.62mm, 0.303” & A7 Ammunition
     

    Main Features:

  • Rate of output 240 PPM as online gauging is done without still standing gauging     components.
  • Non-contact type sensors.
  • Automatic ejection of defective parts after each gauging station
  • Automatic calibration by using two master gauges.
  • Display on touch screen (in microns) of each dimension for each station.
  • Statistical charts for production data analysis.
  • Online fault diagnosis.
    		•
     
    Size Of Machine(Length x Width x Height in mm): 1800 x 1500 x 2000
     
    Weight: 2400 Kgs